wind power Voltage Optimization Module / Low Current Optimizer / Stabilizer

New product

wind power Voltage Optimization Module / Low Current Optimizer / Stabilizer

New and original packaging

More details

2 Items

Delivery:

Warning: Last items in stock!

By buying this product you can collect up to 10 loyalty points. Your cart will total 10 loyalty points that can be converted into a voucher of 2,00 €.


106,20 € tax incl. tax incl. excl. shipping

-10%

previously 118,00 € 118,00 € tax incl.

Add to wishlist

Zahlungsarten
Zahlungsarten

More info

Voltage Optimization Module / Low Current Optimizer / Stabilizer

Efficiency approx. 96-98%

which increases an input voltage from 10V to usable 28V (or for 24V battery)
and the current voltage from 10-60V to max. 28V limited and optimized (under 10V bsw. 7V to 24V) so increased or decreased, or even a 12V battery voltage (with discharge protection) converted into a 24V voltage with up to 1800W

thus, depending on the preset, remains stable even at higher input current to 28V (pre-adjusted)
(other voltage limitation on request possible on request, or 36-40 or 48-52V (still untested)) and thus contributes to the optimal current utilization even in the lower voltage range of a wind turbine or similar, without the need for an extra MMPT regulator

is mounted and pre-adjusted on request (alternative current values a.A.)
Image similar with new module variant (easier to adjust)
installed in moisture-resistant protection box

can also be used as an inverter for 12 or 24V battery system
incl. discharge protection (which would then have to be adjusted on the controller as required)
incl. multiple circuit breaker 30A (manual and with 3 plug-in fuses)
and incl. double solar cable input and output cables each approx. 30cm (without protective plastic cover as in picture)
incl. key for box and wall mounting corners

Voltage converter module with built-in fan (incl. German manual)

Work Features:
Output power: 1800W
Input voltage range: 10V-60V
Output voltage range: 12V-90V
Input current: 40A Output current: 22A
Dynamic response speed: load current change 5% (300us)
Conversion efficiency: 48V to 60V 8A (98.1%)
          48V to 72V 8A (98.1%)
          48V to 84V 8A (97.6%)
Load regulation: 10% to 50% load ((72V output))
Temperature coefficient: 50% load
Ripple & Noise: 20MHz Bandwidth (48V-72V 4A) 100mVp-p
Switching frequency: VIN=48V VO=72V 4A (110khz)
No-load current: VIN=48V VO=72V (18mA)
Output short circuit protection: YES
Input reverse protection: YES
Storage humidity: 95%
Working temperature: -20 65°C
Storage temperature: -40 125°C
Temperature rise during work: 48V to 60V 5A (45°C)
Over temperature protection: (60°C)
Wiring method: IN input, OUT output (No welding, terminal blocks)
Cooling method: Strong wind cooling
Appearance size: 130 (L) * 51 (W) * 80(H) ( with copper pillars) mm
Package Contents:
1800W 40A DC-DC Boost Converter Step Up Power Supply Module Constant Current"
since individually manufactured and adjusted for them no return possible
but of course the use of the legal warranty

Reviews

Write a review

wind power Voltage Optimization Module / Low Current Optimizer / Stabilizer

wind power Voltage Optimization Module / Low Current Optimizer / Stabilizer

wind power Voltage Optimization Module / Low Current Optimizer / Stabilizer

New and original packaging

3 other products in the same category: